Wondering How to Remove Mold from Carpet? Check Out these Useful Tips

Carpet mold is unpleasant. It produces nasty and lingering odors, degrades your carpet and reduces its aesthetic appeal. What’s worse, mold can cause severe allergic reactions in sensitive individuals. Not only that, carpet mold is not often seen until it’s too late since most people wash carpets occasionally. If you have recently identified mold on your carpet, it’s highly advisable to get rid of it as fast as you can for the safety of your family.

What Causes Molding on Carpets?

Even light humidity in a basement may build up over time, providing a good environment for mold to thrive in.
Moisture is the only reason mold grows on your carpet.

The main cause of carpet mold is moisture. Moisture is the only reason mold grows on your carpet. In most cases, mold in carpet is found in house basements or in rooms with excess humidity in them. Basements are notoriously damp places, which is the reason why many homeowners avoid installing carpets in these underground floors. Even light humidity in a basement may build up over time, providing a good environment for mold to thrive in. In other rooms, moisture may come from plumbing issues in your home or a crack in the ceiling of a worn out roof.

Water damage is another common cause of carpet mold. Plumbing issues such as a burst pipe, flooding, or an overrun sump pump can cause the carpet to become overly saturated and soaked in water. A water-soaked carpet provides the perfect environment for mold to grow. If your carpet has been subjected to water damage, you can try to vacuum some of the water or hire a licensed carpet cleaning specialists to dry the carpet for you. This is something that should be done within a period of 24-48 hours. Otherwise, the longer the water sits on the carpet, the higher the chance for mold and bacteria to grow.

Another cause of carpet mold is incomplete drying after cleaning. If the carpet is not properly dried after cleaning, the dampness will cause mold growth. If cleaning the carpet by yourself, it’s important to ensure that it’s completely dry before installing it on the floor. Likewise, if you’ve hired professional carpet cleaning services, ask them to dry off the carpet.

How to Remove Mold from Carpet?

 

If cleaning the carpet by yourself, it’s important to ensure that it’s completely dry before installing it on the floor.
The longer the water sits on the carpet, the higher the chance for mold and bacteria to grow.

To get mold out of carpets, you can either make a homemade mold-killer using specific ingredients or use store bought products. All you have to do is follow the right mixing instructions carefully since some of these mixtures can be toxic and dangerous.

Here are some useful tips and a step-by-step guide on how you can remove carpet mold without help from a specialist.

NB: Remember to wear protective gear consisting of clothing that covers your body, goggles, facemask, and gloves since inhaling or touching mold can cause serious health complications.

Mold Inspection San Francisco
The first step to removing carpet mold is performing a thorough inspection.

· Inspect the Carpet

The first step to removing carpet mold is performing a thorough  mold inspection. During inspection, check all areas that have been infested with mold. These areas include carpet fibers and carpet backing. This will allow you to remove it much easily.

· Ventilate the Room

Keep the doors of the room with a moldy carpet closed to prevent mold spores from spreading to other rooms. Open all the windows for good air flow in the room.

· Place the Carpet Outside in Direct Sunlight
Direct sunlight will remove moisture on the carpet

· Place the Carpet Outside in Direct Sunlight

If the carpet is removable, hang it over a clothesline under bright sunlight and leave it for about 48 hours. Direct sunlight will remove moisture on the carpet and also kill the mold spores. If the carpet has been subjected to water damage through to the backing, leave it much longer under direct sunlight- for several days.

 

· Use White Vinegar and Baking Soda to Remove Mold

Vinegar and baking soda are excellent treatments for carpet mold. They work effectively to slow down the development of mold, kill mold, and help eliminate bad odor as well. Baking soda especially does a great job absorbing moisture from the carpet.

Soak the carpet with vinegar for about one hour before rinsing off. Next, mix baking soda with warm water to make a thick paste. Apply the paste onto the moldy carpet and leave for another hour. Finally, brush or vacuum the carpet to remove the paste and mold from your carpet. It’s as easy as that.

· Use White Vinegar and Baking Soda to Remove Mold
Vinegar and baking soda are excellent treatments for carpet mold

· Use Lysol and Water

A Lysol-water solution is another excellent solution for removing mold on carpet. Mix one cup of Lysol with a bucket full of hot water and spray onto the moldy carpet. Leave for around 20 minutes and then vacuum to pull the mold out.

· Use Either Grapefruit Seed Oil or Tea-Tree Oil

The two natural oils have powerful antifungal and antibacterial properties which can help stop the growth of mold on your carpet. Fill a spray bottle with hot water and then add 10 drops of grapefruit seed oil or a teaspoon of tea tree oil. Spray onto the affected areas, leave for a few minutes, and wipe with a cloth. These amounts can vary depending on the extent of affected area.

· Use Commercial Carpet Mold Treatments

There are many commercial carpet mold treatments available in most drug stores and supermarkets. You can purchase anti-mold treatments, carpet cleaning products such as Vanish detergent products and chlorine dioxide products. You can also rent a carpet steamer which is very effective in removing persistent mold.

· Use a Dehumidifier to Get Rid of Residual Mold Spores

Air Quality Mold Test Results
Use a dehumidifier to get rid of mold

A dehumidifier can help to remove any mold spores that are left behind after using any of the above removal methods. Be sure to clean the equipment to prevent the spores from spreading to other parts of the house.

What are the Best Products for Mold Cleaning on Carpets?

A detergent used by Mold Out Services team
There are different products for removing carpet mold

When it comes to removing mold on your carpet, using a carpet cleaner isn’t enough. There are different products for removing mold on carpets which are much more effective- both homemade and commercial. Homemade products include;

· Vinegar and Baking Soda mixture

· Lysol and water solution

· Dish washing detergent and water solution

· Tea Tree Oil or Grapefruit Seed Oil plus Hot water solution

The most effective commercial products for removing carpet mold include;

· Anti-mold or anti-fungal sprays

· Carpet cleaning products such as Vanish detergent products

· Chlorine Dioxide products

· Steam cleaner

· Bleach (usually mixed with water)

When Should you Hire the Services of a Mold Cleaning Specialist?

When Should you Hire the Services of a Mold Cleaning Specialist?
It’s important to remove the mold quickly

Having mold on your carpet can be stressful and a health hazard as well. It’s important to remove it quickly to reduce the risk of health complications. Here are some of the reasons why you should consider hiring a mold cleaning specialist to clean your carpet and remove mold.

· If the mold is growing and spreading quickly- As long as the carpet is damp, nothing will stop the mold from growing and spreading quickly. If this happens, the health of your family is compromised. The best solution would be to hire a mold cleaning specialist who will use the most effective mold removal methods, products, and equipment

· If mold causes allergic reactions- if you or any family member are showing allergy symptoms such as a runny nose, itch eyes, or sore throat, consider calling a mold cleaning specialist as fast as possible

· If you don’t have the right mold-removal products and equipment. A mold cleaning specialist has the most effective and advanced mold-cleaning products and equipment. Consider hiring one to remove mold on your carpet once and for all

The Qualities You Must Look For In Any Mold Contractors Before Hiring Them
Consider hiring professional carpet cleaners, if you don’t have time

If you don’t have time to clean the carpet- If you have a busy work schedule, consider hiring professional carpet cleaners who will do the job for you at an affordable fee. Regular carpet cleaning is important to prevent mold from growing on your carpet.

If not removed quickly, mold can cause serious health complications. If the mold has spread to the backing, replace the carpet. You should also make a point of cleaning the carpet on a regular basis as part of home floor care. Hopefully, these tips on how to remove mold from carpet will help you get rid of this menace for good.